Hello again, Definitely not too warm. I am not entirely sure what paint colour you are thinking of but as pointed out - easier to adjust paint rather than the other way around. If the tiles were really grey and the walls were that tone as well, it would be a very flat, souless look - the slight touch of warmth in the tiles is a good thing and honestly being so neutral your options are huge with colour of walls, particularly if you are intending to use this tile throughout. May I suggest you choose a paint colour and then use different depths of the same colour depending on sunlight, dark corners, more impact in certain areas etc to create the interest. Be wary when you have such a neutral, albeit very tasteful tile, it may be wise to adjust the paint in this way to lift the level of interest. Take a look at the following colours - Resene House White and Resene Concrete as starters - very unobtrusive. You could always go for a hit of charcoal in areas too. Avoid any "feature" walls - do the whole room - nothing wrong with strong, dark colour, even in small rooms - think powder room or laundry if you are not brave enough to do an entire, larger room. I am also assuming you will be introducing plenty of white trim on skirting boards etc - for what it is worth, my go to white is nearly always Resene Alabaster. Loving the sound of the carrara - such a classic. Hope that helps :)

Hi Sofia I definitely think brick lay would work better on the walls in the bathroom purely because you have a 30x30 on the floor and a 30x60 on the wall. You will find the tiles could look out of place trying to stack them. It would be a different matter if they did not share 1 or more dimension. Perhaps in the ensuite, consider doing something like this: [https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278[(https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278) Tile the floor and half way up the back wall with the "floor tiles", perhaps a tile or 2 above the vanity unit and then continue with the white tiles to the ceiling. You could hang your mirror so it covered about 1/4 of the "floor tile" and 3/4 of the white above the centre of the sink. In the main bathroom consider something like this: [https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647[(https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647) Tiling the back wall to the shower in the "floor tile" to the ceiling with the white tiles behind the loo to the ceiling. Alternatively, tiling the entire back wall with the "floor tiles". The first option may make the bathroom feel smaller if the shower takes up more than 1/3 of the back wall. Doing the two different options would give the bathrooms continuity, but also some individuality. I hope this helps. Look forward to perhaps seeing the outcome. James

Get a tile cleaning product from Bunnings. Will ensure that the integrity of the tile is not compromised. However, by the look of the stains it seems as though something has been used that was too abrasive, too acidic or that had bleach in it. I do not recommend to keep any product on for an extended period of time. 5 mins max application!

I think she may have been referring to what is called a "French Pattern" which looks like a random mixture of square and rectangle tiles, often in travertine. However while it looks random it is actually carefully planned, and the tiles are made to a consistent thickness. It also depends on the type of tile that you are using. Many traditionally hand-made ceramic tiles have a natural variation, which adds to their appeal and visual interest. Other types of tiles, such as your porcelains are much squarer, flatter and almost identical. I would suggest that you go with your your choice of grid pattern, as laying a random pattern has too many risks (plus your tiler will hate you and charge lots extra). Be very careful about the selection of your tiles depending on your preference for a rustic more organic look, or a hard-edged architectural look. Make sure that the surface that you are tiling to has been properly prepared and is flat, smooth and true, as your tiler will not be able to correct imperfections if you have a bad wall. Best of luck, Dr Retro of Dr Retro House Calls