Your tile will co-ordinate beautifully with the timber if you can pick one of the darker colours out of the timber and select a tile in this family of colour. The trick to making a colour concept work is to either co-ordinate or contrast. If your timber is as busy with grain and colour as the image you've shown, then maybe co-coordinating is the best way to go. Never chose materials independently of each other - always take a tile sample home to see in the natural light, next to the timber. I hope it all works out the way you envisage it. Cheers, Michelle

You should ask your builder why he is reluctant about 3 metres ceiling heights on the upper level. It is more work for him, so he should quote appropriately, and be paid for the extra height, the extra materials, the extra scaffolding etc. If you are building as an investment you need to understand your market. Will people pay extra for the extra high ceilings so it is profitable for you? In some really expensive areas homes with ceilings less than 3metres are looked down on by the buying public. In poorer areas people are more interested in square metres of floor area than ceiling height so you would lose money by putting in 3m ceilings to both floors. When building townhouses you need to think with your head, and not with your heart. Everybody loves high ceilings, but make sure that you increase the door and window heights proportionally. Standard height doors look funny with 3m high ceilings. This is one of the reasons why 3 metre high ceilings do cost so much more as you need everything taller, including window furnishings for it to look right. If you are building townhouses for future rental you will need to outweigh the additional cost of the extra height with the small increase in rent that could be achieved. While you say the height limit is 11 metres, it probably isn't 11 metres when it is close to the side boundary. Many townhouses are built close to the side boundary so you should check with your council about the side setback requirements. Usually the taller the building the further it has to be from the side boundary. Best of luck Dr Retro of Dr Retro House Calls and Dr Retro Virtual Visits

I would suggest Luxury Vinyl Tiles, especially for a kitchen where the floor could get wet.

i'm guessing that a problem could be that the boards will shrink and create drafty gaps so i think my old builder dad would have laid the boards upside down, without nails to settle to the temperature and moisture in the room while he did other jobs for a week or two and then turned over the boards and, using a solid timber length to push the boards tight as possible before nailing and he would have probably appreciated the idea of adding some under floor insulation as well