Thank you we are looking forward to it :-) I have already done a whole floor plan for the renovations and additions and I have done elevations for the kitchen, which have already had a few changes due to seeing something on Houzz and thinking hmmmm that would work better etc. I will also run the drawings past an architect just to make sure there isn't a better way of doing things. Also we will live in the house as is for quite some time before starting the renovations which will give us a feel for how things should be. Very much appreciate all the advice. Regards Lynda

I would speak to Tim Lorian of Milano Stone in Claremont, he knows everything about stone. www.milanostone.com.au

Hi Wally, when your tops were made, all the corners and folds were welded and flushed, whereby making invisible joins. You could now get a Stainless Steel Fabricator back in to weld up these holes and then flush the welds and resurface the whole benchtop; bringing it back to its original condition and making the holes invisible. Hope this is of help to you. Malcolm

@Mc10 - We are also recirculating - and we are venting this through a gap in the kickboard where we will eventually also install a mesh / metal grill to keep bugs out etc. When the extractors in full flight it does throw out quite a breeze so make sure wherever you decide to vent isn’t somewhere that will annoy people who are sat - luckily where we vented is into where people just walk though. We hardly lost any storage if you look at the pic I posted what looks like the first drawer at the top is what we boxed in to price clearance and access - I think it was about 15 cms - not that significant as lots of storage space elsewhere.