We have four farmhouse style sinks in two different houses, and all present the same problem. It doesn't have anything to do with the material as two sinks are concrete, one stainless steel, and one composite stone. With the two kitchen sinks it's very frustrating spraying out the food particles from corner to corner. Food particles go from one side to the other, and it's very difficult to corral them to the drain. The two concrete bathroom sinks don't have enough slope, so when shaving and brushing teeth, the water and material flow to the opposite side of the sink. It's annoying to wash a 3' wide sink every time it's used. And gross if the sink isn't cleaned from side to side after every use. As a compromise, we're installing a farmhouse concrete bathroom sink with two drains and more slope. As I evaluate many things in life, a, farmhouse sink is a solutions looking for problem.

I couldn't tick one or the other of the boxes – I think the choice has to be made contingent on so many variables. In fact we have painted timber, double-glazed bifolds (with a fabulous retractable pleated fly-screen) at the end of the dining room leading out onto a terrace and a painted timber, double-glazed slider (with a timber-framed sliding fly-screen) on the other side of the kitchen (but on the same axis) opening onto a raised timber deck. Each works really well in terms of function and aesthetics but they would not be interchangeable as the different locations determined which was more suitable – but they have been made by the same highly skilled window craftsman and have given us nothing but pleasure. And on a hot, steamy evening with both open we have the most wonderful cross ventilation.

Thanks Yvonne, It's a great product this one was selected by Mr Plywood Newcastle with a beautiful grain. We had a narrow white laminate board set back under it to give the shadow line, most certainly do it again cheers

Hi How2Girl, I appreciate your follow up! The Reece document is good - thanks - I wish there was something concrete in the Standards though. Worth notiing is that a shower over the bath needs the same wall-sheeting details as if it was a shower base. Also wall framing in the bathroom needs to be done to AS 1684.2-2010 Residential timber-framed construction - Non-cyclonic areas (Which the James Hardie 'wet area design book' is based on) Very frustrating that the Australian Standards are not readily available - ie FREE- or at least, latest copies at local libraries. How are we meant to build to standards when they are inaccessible. Another factor in determining the overall quality of the Australian construction industry Also what I've found frustrating in this instance is that other trades in my small town are unwilling to agree that the work is of very poor quality - there is an unstated 'brotherhood' at work. So Im going to have to engage an independent Building Certifier, probably from out of town. Of course,the cost for this will come off the builder's fees on a pro-rata basis for below-par work