Hi Ron, I think that's a great selection and I believe will work well together. The black and white of the stone/tile has a nice minimalist feel, and a wooden look vanity will offset that with some warmth. Definitely recommend that, well done :-) I've attached a pic of a similar approach we've designed recently - timber veneer vanity with black marble tile with white solid surface sink, has a similar feel. Now with the timber you have to make sure that - if it is veneer (i.e. actual timber) it has a good protective coat (you could go for a 2pack finish or similar), and if it is a timber-look-laminate, make sure to double-check with the supplier it is suitable for bathroom application. I wouldn't recommend using veneer for the top surface, but you could use a suitable laminate, or you could even go for a solid timber bench top if you don't want to do stone. If it was me, I would just do the vertical surfaces in wood, and the bench top differently :-) Anyway, good luck with it all ! Marc.

Hi Some floorboards can have a finish applied as they come raw whilst others cannot without work. It depends on the brand and finish. I suggest you speak to the installers and get hold of the manufacturers rep to ask about the finish if it is not readily available at the point of sale. You should be able to just have the floor lightly buffed after it is installed (ie scratch/rough up the existing polish) to create a purchase for the new polish without actually sanding down to the timber. You do need to know what type of finish it is ie oil based or water based on the original boards as they can sometimes react with each other if you change. Then your sander can apply the new finish. Cheers

contact the public relations liaison at the company and they should be able to advise the contact details for the designer or architect who can provide specific information and/or take close up photos in good daylight and ask a paint supplier or paint section at Bunnings or similar for advice

all heaters and stoves should have very specific installation instructions including distance above the stove to any mantlepiece and i suggest you start with advice from local suppliers and then confirm with specific written instructions from each manufacturer that you can usually find on line...There are a number of heaters that have wood fires that are designed to be inbuilt in a purpose made wooden frame so hopefully this can be done inside your opening