Our island is 900 depth, 2400 wide, with a sink in the middle (opposite the cooktop), which works well for us. Plenty of prep area either side of the sink (mind you, it's a single undermount sink, about 500mm wide, with no drainboard). If we were going to use the island for actual meals, ours is only deep enough for a person either side of the sink. So, if you're thinking of having the island as a dining area, go to the 1200 depth. Just walk around it to clean it. On the other hand, if the island is going to be for prep, and a place for guests to prop up a glass of wine and chat while you're getting dinner, 900 is fine. Our dishwasher is to the immediate left of the sink, and we have pull out waste bins underneath the sink. We have 1200 mm space from island to the wall side and the range top, and about the same to the other ends. Our fridge, which isn't huge, is in a 900 mm+ cavity which would be big enough for a deeper fridge. It's in relatively the same place your fridge is, and works fine there. Hinges are on the non-kitchen side of the door, so it opens into the kitchen. Cabinets beside it are a bit more in depth, so fridge and cabinets line up nicely. 850 for your fridge seems reasonable to me. I wouldn't put that study where you have it: I think you'll need all of that butler's pantry for butlering type storage. My 5 cents worth based on new house, new experience, absolutely no kids in the equation!

Tell me about it, the ones across the road were going all day and night in the front yard, including revving up a motor bike they're not allowed to ride! my hubby wears flannie shirts when he's not in work gear. He likes ripping them, that's a trend that should end. of course, all Australian flag thongs (flip flops) are made in China!

Hi Richard - the final kitchen layout looks amazing!! Congratulations. Any chance you could tell me what program you're using to design the kitchen / layout? I'm starting some minor renovation works on my house soon and would love to use something similar.

Hi SonaandDi, In case you haven't come across it, here is the link to my finished kitchen: https://www.houzz.com.au/discussions/5598603/renovation-of-our-1956-red-brick-triple-fronted-home-all-done This layout has the potential for issues, but I tried to factor those in by noting where the fridge doors came to when fully opened. I should have allowed a little more width for the fridge gap, as the theory didn't quite translate in practice: on the plans I allowed the minimum of 20mm either side of fridge, but ended up with only about 13mm (was not fun getting the fridge in!). So my suggestion is to make sure there is 50mm either side of fridge. eg the fridge space is 1000mm wide for french door fridge around the 900mm mark. Even so, my doors do open fully (vegie drawers slide out unobstructed), as the doors themselves sit forward of the nib wall on the right. If your fridge space is wider, you won't need to sit the fridge out the full thickness of the doors, which may look more streamlined. But make sure you allow for 50mm space at the back of fridge. This will decide the depth of your nib wall. I calculated mine as 50mm plus the depth of the fridge to the start of the doors. You might prefer to make it a bit deeper, as the doors have more room to open due to the extra width of the space. It isn't annoying having the door opening over the pantry entry. It isn't often that someone wants to get to the pantry at the exact moment someone else opens the fridge. Even if that happened, you could get past if you couldn't wait: Good luck with your renovation! Because you can't be on site, I would always factor in more wiggle room. Let me know if I can help with any more info - I could talk about this stuff all day long!