@urj123, Cricky!!! I knew you were going to ask that, after I looked at the sample I had that was full strength ha-ha.....AND I re-read you post and you wrote quite clearly 1/4 strength!!! I will return to the store, AGAIN, ha-ha and ask for 1/4 strength. All jokes aside, I think 1/4 will probably be real nice, as I didn't dislike the full strength but too creamy for the ceiling. My daughter actually painted all her ceilings the same colour as her walls with Hog Bristle but all the experts seem to say that a ceiling should be white or at least traditionally its always been white and I like the look of that too. I won't be back in town until next week but I'll keep in touch when I have the sample in my hand. Hubby and I are hay contractors and are at our most busy time being in tractors for many long hours but we are nearing the end and then I can take a breath and turn my focus back onto the home. Actually have 80mtrs of edging or capping tiles around the veranda to do and then the same amount of concreting to do on the 1.8m wide veranda and then we can get the colourbond roof on the house and during the cooler months, we can start to lay the limestone bricks, so there's plenty to do on the home!!! I have photo's attached in an earlier post. Best get to bed, more hay baling to do tomorrow. Cheers, Barbara

siriuskey, Yes, the courtyard is open to the sky (no roof over it), I assume this is what you mean by double story. Ref. below photos, I would love to get this look, especially the first and last photo, where you can see family living space from the first floor. I can't achieve this in my plan as it eats a lot of floor space upstairs. The referred plan (photos) has a very big void combining staircase, hallway and dining area. I know it is not easy with cooling and heating when you have such a big void. So, I explored a few ideas (with my limited knowledge on this topic) before achieving the current floorplan. I have also thought about, in my current plan, extending the void on the staircase to the dining area (it is more like L shape) but i wasn't sure if that makes any difference. keen to hear your thoughts.

Kate: - I like the idea of a door at both ends of the new central bedroom doorway - maybe some kind of thin sliding door or a foldable shutter door might be best? - house can’t be knocked down/rebuilt due to location in a heritage conservation area OkLouise: - thanks again for doing this - I’ve loved all of your updates, they are so well thought out and hope to incorporate them all into the build - will send you a token of appreciation when the build is finished! - we have already been thinking about whether to rotate the kitchen island 90 degrees as you have drawn - i think it might look weird? but i’m not sure - theres a lot for us to process with your new updates so we'll need to spend some time thinking about them! - i’m resistant to reducing the size of study 2 as that’s the most important room for me as i will spend a lot of time there and it is doubling as a work productivity office/man cave so really want that room to be fantastic! - i thought the laundry chute was above the laundry but will need to ask the architect Siriuskey - I also think there may be too many bathrooms in the house - due to the good location of the property i think it is hard (within reason) to overcapitalise on the property so believe it will grow well in value in the long run so would rather overdo it than underdo it - FWIW the other houses in the street/adjacent streets are kind of similar to our proposed plan so its not out of keeping with the area - am still wondering about combining the downstairs powder room/adjacent en suite into one big bathroom for a bath - variable number of family members staying but 4 to 11 over 3 generations at various times of the year - the plan for the mudroom is for it to be the entrance into the house that we use most so it can also act as a cloak room too so that’s why its not near the laundry - i don’t want a lift in the house as it seems unnecessary for our needs and fi we ever ended up in a situation where we needed a lift we would just sell and downsize Dreamer: - i think we (parents) might end up living downstairs when the kids get older/noisier - they are in primary school currently Pleased to Bijou design - point taken about number of bathrooms - i don’t really have a good answer Paul Di Stafano & Dr Retro - i can sense and empathise with your professional frustrations :) - thanks for the good luck wishes, I agree we’ll need it - fortunately I’m a lifelong/relentless optimist and things always seem to work out ok in the end (and if they don’t, I’ll take it as a positive learning experience) - thanks for the insights into dodgy busy practice business models mummagabz - thanks for comment about small robes - will look into making them larger

True the standards will be different, but as far as I know, the standards in Australia for waterproofing tubs only state what the outcome needs to be, not necessarily the exact equipment used to achieve it. I think something like this on the market would solve a problem for many people. I've just seen horrendous installations on NEW buildings that included MANY APARTMENTS especially where water clearly runs down between tub and wall and not to standard at all. I can't believe what builders get away with. The way I found out about this stuff is because I've pretty much exhausted my options. Scrolled till my eyes could scroll no more! :) Over many days. I saw a bath on Temple and Webster of all places which stated that it comes with an adhesive tile bead, and I was like, what is that?! I am now actually considering that tub, so I might not need to get a separate thing. But otherwise I was thinking another type of trim or flange attached to the tub could very well do the job just fine. I'm still very confused why island baths are more often offered as a wider bath and flange baths (and especially anti-slip ones clearly concepted to be shower baths) are narrower. I'm guessing they know what sells, but it goes against my design instincts!