When I first wrote in August 2017 we got a lot of great suggestions and comments. At the time we had accepted the limitations of the block (easements, tree, solar access etc). It is now one year later and I can tell you we found a way to move the garage to the south-west corner. This allowed us to move Beds 2 and 3 and the bathroom to the northern side. Pantry and laundry between garage and kitchen/living/dining. I think it was all of the comments and suggestions that encouraged us to look at it again from different angles, rather than just accepting the limitations. Thanks to everyone for their generosity! The solution involved working around a lovely tree (it is nice, just in the wrong spot). It is still in the way (council said we couldn't remove it) but we've opted for a long, curving driveway that starts on the other side of the block and weaves its way around the treeline to the garage entry. Not ideal, because a large portion of the front setback will now be a hard surface, instead of a garden. But if there is one thing that designing teaches you - its all about compromises. Thanks everyone. MB Design & Drafting Shara C Nik Star girlguides oklouise siriuskey genkii saragraham76 Andy Pat brizcs Mel N 3D Home Concepts suancol Caro

My thoughts. Firstly, as has been said, you'll get better results seeking professional help, especially for such an unusual design. The external surfaces are an expensive part of a build. The larger the external surface area per sqm of footprint, the larger the cost per sqm. Seperate wings & courtyards increase the external surface area greatly. This plan has a very large external surface area, so will be costly per sqm, for what is already a very large dwelling. Separate wings also increases hallways & circulation space, which some people find wasteful, & increase the time to move from one part of the house to another. Instead of a U-shaped house, how about an L-shaped house? This would reduce the external surface area of the build & the amount of hallway space, reducing the cost per sqm & the size of the dwelling. With an L-shaped home most rooms could face the outdoor space in the NE side of the block, but some (possibly the minor bedrooms) would likely face the southern street. So, a couple of questions; Is this a newly developed or established area of Sydney? If it's an establish area with neighbours close by, could you post a screenshot of a Google Maps satellite image, to get an idea of outlooks & whether there will be privacy issues with neighbours? How quiet is the southern street? Are you happy to have rooms facing this street? How much busier is the western street? Is it possible to locate the garage facing the western street, or is it too busy for access? I'd much rather have the garage face a noisy street than the master bedroom (although the ensuite will help a bit). Also the western side of a dwelling is a great place to locate a garage, as it shields the house from the hot afternoon sun. The west is not a good place for bedrooms (although again, the ensuite will help). On that note, have a read of this, paying attention to the section on passive design & orientation. http://yourhome.gov.au/passive-design/orientation As for your current design, your bedroom wings are likely to shade your living areas for much of the day in winter. A skillion roof with north facing clerestory windows, as shown in a few of the pictures in this thread, would help get winter sunshine to your living areas. Although an L-shaped build would allow more northern light to the living areas than the current U-shaped plan. Best of luck with the build.

Hi there, tiles on the floor of a bedroom? It sounds a bit cold underfoot unless you are having underfloor heating installed, but then perhaps you are renovating in warmer climes than where I live! I would recommend going for a matte or satin finish in the bedroom as the gloss could look a little sterile.also If you have a connecting ensuite, you wouldnt want to run the risk of slipping on the floor if you have wet feet :o

I have got the sample pots and I’ve painted them on large cardboard, it’s more the benchtop I want to blend in nicely, as well as splashback. I know I won’t find the exact combinations, would be nice to see one or two of the colours to get a more visual idea. They aren’t the popular ones like lexicon and all the mainstream dulux whites. So the bricks have all been removed, and under the bench is just going to be the same as the kitchen cupboards. The brick pier has been Gyprocked. Do you think a smoky mirror splashback will look good?