Hi, I had a Spotted Gum Timber Floor ( 10mm Real Solid Timber Single Planks ) in a penthouse apartment for 8 years . It was pre-coated in high gloss clear from the factory . When it was laid it was necessary to have a noise reduction 3mm foam under layer ( apartments underneath building noise requirement) . This method of installation actually made the floor very quiet and it also made it a little softer to walk over . When it got any scuff marks, they just easily wiped off with a damp cloth. When I sold the penthouse, the floor was in exactly the same condition as the day it was first laid - first class. It was only ever cleaned with a steam cleaner , no chemicals whatsoever . I would certainly recommend the pre-coated polyurethane gloss finish on the real timber planks to anyone, it was great ! You can just see a glimpse of the kitchen floor in the attached two images. Good luck with your specifying . High quality surface finishes normally stand the test of time . I have added a couple of extra images of the penthouse for interest. We did the interior design fit out after buying the shell from the developer. It was a stunning sky home . Cheers LAADP

Spotted Gum is a great hard wearing timber with a Janka rating of 11. This means it is high density timber and won't dent as easily as softer timbers like American Oak. A polyurethane finish is the hardest and most durable timber floor coating and it comes in gloss satin and mat. The lower sheen's are more forgiving if you you have pets and young children. Bamboo is another hard product but only comes in short lengths so you would need to take that look into consideration when selecting. Some clients don't like the look of the short boards and consider it a cheap look. Others prefer the longer floor boards of timber. If you do choose bamboo make sure that you find out the coating used and whether it can be sanded and re coated down the track, as all timber and bamboo floors will need a touch up especially if you have pets. Some bamboo floors can not be sanded due the coating used. Hope this helps. Our website may offer some inspiration. Good Luck http://budgetfloorsanding.com.au/

Our last house and our current house both had wood floors and lots of wood furniture. Using area rugs (I've got a weakness for oriental rugs) provides separation between the floors and the furniture. And if the walls are light, as in LesleyH's photo above, you will certainly not feel overwhelmed with wood. The only time there's an issue in my mind is when the walls are also wood clad - that can be a bit confronting and needs management.

What natural light do you get in the room/what orientation? i.e. is it a 'cold' or 'warm' room? If it's a colder room, I'd go with a grey with orange/red undertones to warm it up a bit, or if it's a warm room you could get away with a cooler grey, maybe green undertones to compliment the maroon. Or you could even try a green rather than grey. The Aerobus is a blueish grey so will be cooler. As others have said you would probably want a lighter tone than this for the walls (unless you're purposely going for a dark dramatic mood). 'Miller Mood' is a couple of shades up in the Colour Atlas. Get sample pots and paint a section on each wall, or paint a white bit of card and stick to the wall to see how the light is at different times of day.