How funny. I just renovated (on a budget) my small kitchen and added exactly the slate look in tiles you have, though they are in fact porcelain. And I placed them throughout the house for continuity. The tiler asked if I was after a retro hippy look but it doesn't look like that at all. My cupboards were the same colour as yours and I utilised the bones of the kitchen and had the doors and Benchtops changed only. I also have plenty of light in the kitchen but chose white doors and as I was on a budget I chose granite look Benchtops, they are very serviceable and it looks great. The blue backsplash was the colour lift and here you could choose any colour to your liking. Basically the kitchen ended up with white cupboards and appliances other than cooktop, with the stainless cooktop and coloured splash back being the focal point. The paint colour are: whisper white walls, integra splashback, white ceiling and for increased contrast I used the same white above the splashback on the rear wall. I would consider painting out the brick but leaving the texture.

Hello again, Definitely not too warm. I am not entirely sure what paint colour you are thinking of but as pointed out - easier to adjust paint rather than the other way around. If the tiles were really grey and the walls were that tone as well, it would be a very flat, souless look - the slight touch of warmth in the tiles is a good thing and honestly being so neutral your options are huge with colour of walls, particularly if you are intending to use this tile throughout. May I suggest you choose a paint colour and then use different depths of the same colour depending on sunlight, dark corners, more impact in certain areas etc to create the interest. Be wary when you have such a neutral, albeit very tasteful tile, it may be wise to adjust the paint in this way to lift the level of interest. Take a look at the following colours - Resene House White and Resene Concrete as starters - very unobtrusive. You could always go for a hit of charcoal in areas too. Avoid any "feature" walls - do the whole room - nothing wrong with strong, dark colour, even in small rooms - think powder room or laundry if you are not brave enough to do an entire, larger room. I am also assuming you will be introducing plenty of white trim on skirting boards etc - for what it is worth, my go to white is nearly always Resene Alabaster. Loving the sound of the carrara - such a classic. Hope that helps :)

Have you been to visit some kitchen showrooms? You can customise the photo search here on Houzz quite a bit. For example, you can simply select [dark wood[(https://www.houzz.com.au/photos/kitchen-design-ideas-with-dark-wood-cabinets-phbr1-bp~t_10444~a_17-103) cabinet finish in the filter options. Then add more filters like floor colour, kitchen layout, cabinet style, wall colour etc if you wish. Leave the benchtop and splashback options open and see what results you get. You can then save any photos that appeal to your ideabook.

If you were selling , are you sure you will recoup the extra $$$$ ? Get it wrong , and a potential buyer will walk and/or offer $50k less , whereas if you leave it as it is , they will know it needs replacing , offer $10k less , but you have gotten an offer ! Just me , but what I would do is rip up the fake tile lino in the foyer ( I assume it is lino -- it doesn't look to be 'proper' tiled ? ) , and do that in a darkish timber laminate -- slightly lighter than the front door , slightly darker than the stairs . Or go really dark -- almost a dark weathered grey or a similar dark brown to the drawer unit in the lounge -- the rest of the colourings will lighten it a bit , but it will all tie in . OR actually tile it , maybe a black or charcoal gloss marble or marble effect with lighter streaks through it ? The house and colourings look an older style , this continues that theme , but I feel white or beige tiles would look too bland . $2k max instead of $10k -- marble tiles may be more than $2k , but up to you .