Agree wiuth Barbara and anyone thinking iof putting a paint-loaded brush or roller anywhere near a vintage timber piece of furniture..."it would be a... SIN! Seems the compulsion of the mass renovcators is to paint everything....and its the easiest solution. Don't think happy renovators and DIY-ers have changed much over the years either. I have just finished stripping five coats of enamel from the most beautiful set of silky oak french doors with etched frosted glass...how many SINS there!!! Silky oak is an open grain timber so the last coats had to be done by the funny little man out in his bush shack restoration shed...and Oh what a beautiful job! I am over the moon and do not care what it cost...although it was not a lot compared to what I'd have paid in Sydney. Here a tip for any appreciators...(.if there are any left) of fine timbers. All you need is an old enamel bath tub and gallons of metholated spirits....just give it a bath and save yourself hours of scraping and fumes and burns. SORRY about the deviatiuon but this is my latest Soap Box...don't paint vintage timber! About your problem Wendi, I think, with Barbara, wait until you have your whole dining set and then stain the piece to fit in with the timber in that...( unless you are going to get a white one...( tongue in cheek). I've seen some really nice dining sets with the best of both ...legs and table frame in a (cringe) painted colour and table top in timber...saw a really desirable inlaid table top at my favourite little man's shed last week..the rest was painted and had a drawer for each place....with old metal handles. Legs were on castors.. The chair seats were upholstered...but needed recovering and the frames were metal...could have been an alloy of sorts. The combination of unpainted- stained timber..especially in inlay, with the painted parts, the metal frames and upholstered chairs just fitted together perfectly...so best of both. You migh be lucky enough to find the perfect table with a natural timber top...( and I wish you to find one with an inlaid design featurting timbers of different hues....) then your lovely little cabinet/sideboard might fit perfectly! There are some lovely timber stains around today...timber can be stained any colour...as long as its a transparent dye. A wonderful product is FEZLAC...that's the base and it is a shellac. To this you add the stain -colour you want. I've used it to put designs (fake inlay) on the backs of some really lovely old chairs...imitating the different natural timber hues in real inlay....So above are a few words, tales and suggestions that I hope will inspire you NOT to paint that cabinet.

I have used Saatchi Art (saatchiart.com) to both browse and purchase art for our home. Original art work can be purchased and most artists have prints at a more affordable price. It's a good place to determine what styles and mediums you love as you can filter your search. For Australian art I love Blue Thumb (bluethumb.com.au). All Aussie and all original. Very few options for cost effective prints unfortunately. I'd be cautious about filling the space for an instant look. As everyone before me has said "art is personal" and as such, I think it should grow with you and your space. Start with one piece that you really love, big or small and work around that. I have found that putting unusual unexpected items on the wall makes for interesting 'art'. My husband's baby shoes (circa 1953) and now our children's first shoes are objects that always create conversation when guests come over. I have a Mexican art cross (we're not religious, the colours and the metal work drew me to it), a vintage wooden Indian spindle, African birds in a tree hand-beaten and cut from a steel drum, a clay mask my daughter made in art class, a woven Maori kit bag, some art that our kids have done at school (put into Ikea frames so they are always the right size. We change them as something else we love comes home), a hand-made ceramic tile, a growing collection of geckos found in antique stores, vintage travel posters in frames, (I'll stop listing what we have!)...all these items and more, have been collected over the last 20 years and put up around our collection of art or in clusters to create stories. I've collected the initials of our family (yes the child with the "K" is not thrilled it's so small and the child with the "G" feels he's by far the favourite! Needless to say both will be replaced in the future when a more appropriate size comes to light) from vintage stores both here and overseas. Our walls are a growing collection of art and objects and at any time I can move things around and change the composition as a new item is discovered. Best advice I can give you is to have fun with it, enjoy creating your own gallery, it's for you to love you're not required to impress anyone else.

Hi there Dave, sorry for not responding sooner, I have been a bit unwell. I would like to add the following ideas. 1) You mention going to a kitchen company and showing your current kitchen plan, the better thing for you to have done would to have taken your floor plan with measurements and asked them what they would suggest, as long as they didn't want to charge you. This way you would get more ideas, not just them politely agreeing hoping to get your business, and why not, 2) I would contact several builders to come on site and give you their ideas of what needs to be done and advise if you would need to involve council and the building costs involved in doing this. The builders will have their own trades electrical and plumbing that work as a team 3) You mention flat packs, they are a great option and can save you a lot of money, Bunnings will do a kitchen plan and cost in store at no charge, Ikea will do the same but not sure about any charges. You can also go online to both and work out a plan, but I would strongly suggest you speak face to face them as they know their product. Bunnings run in store programs where they show you how to assemble their cabinets, both stores have video tutorials, believe me it's worth watching as flat pack anything can be a nightmare. If you can assemble your own cabinets in your own time it will save you a.lot of money, starting sooner than later would be a very good idea I didn't get up to mentioning in planning the layout of your kitchen that the larger the cabinets you use will also save money, ie 2 x 900 as against 3 x 600, the cost per unit plus instead of paying for 3 cabinets to be installed it's 2. It's also makes for a simpler looking design. Most of our Bunnings kitchen is made up of 900 units 2 x Drawers & 900 units 3 x drawer. The exception is 800 cabinet for the sink. 5) Cook top, I would strongly suggest you work a 900 into your kitchen (this would mean having to use a smaller cabinet either side or just between the cook top and the wall). 900 cook tops give superior space to use especially when using large pots/woks and fry pans, they also help to protect laminated bench tops from accidental put down and burns, 6) Range hood, the best look for your kitchen wouldn't be a large stainless wall mounted unit and that's good news as the intergrated ones in over head cabinets would not only look better, give more storage and would cost less. 7) The Island, you have been trying to decide what size, well if you don't have plumbing installed, the island can be free standing with or with out plinths and can be moved if you decide you need more space. You do need to have a couple of power points but make sure they have a longer connection. Our Island is 2.7 x 1200 and has both a cook top and oven with power points and can be moved approx 500m in each direction due to having longer connections. 8) Bench tops, you mention laminate due to cost, we had that problem what with the size of the island. So we went with Plywood (not Marine) We went to Mr Plywood who when the next delivery came in chose a piece with a beautiful grain, had it cut to size and delivered. The plywood sheet came in a 3 meter length but not all do, we had enough to do the sink bench and a top for a tressel table & legs my better half made. cost with delivery 2hrs approx $400. We did a shadow line bench top which had a smaller size white set back under lay. You need to use a good two pack pot sealant on the Plywood. Finally I don't know where I got the picture of the retro coloured kitchen cabinets, but look online at both Bunnings and Ikea cheers

I went through that last year. And, whatever you end up using, the Ikea kitchen planner is a great help in working through choices, layout etc. I can recommend IKEA cupboards, which I got in two colours (antique white and a light ash) - and their installation is even cheaper if you put the cupboards together yourself (even doing the frames for a carpenter is well worth it). The drawers and drawers inside drawers are excellent. I also had to use Kaboodle from Bunnings, as I wanted a corner pantry - it's a system that's also worth considering - my pantry is well made and goes well with the other cupboards. I didn't use IKea for benchtops and splashbacks, as my carpenter had a supplier from whom he could stuff wholesale, which cut costs as well. Twelve months on, I'm still very happy with the kitchen, the quality of cupboards etc.