@ sally wastie....Would have loved those pine kitchen cupboards....before they were painted. Had I a strong yen for :a bit of colour"...(and I do love colour), I would have had a new glossy multi coloured counter top, probably something very striking and then oiled the pine cupboard doors There were no work benches in the kitchen of my 1920s all pine cottage ( always say that the kitchen was an afterthought since it is positioned just of a hallway and consisted only of a sink and a wood burning stove.) I built a small bench/table using VJ pine slats I'd removed from elsewhere and then put a thick pine top that curved out from the small straight bench to form a little round kitchen table..Then came the fun, I painted the benchtop and table a datk teale colour, gave it a flecked faux marble finish and a couple of coats of high gloss waterproof varnish. Nothing terribly amazing but it did give the old...'kitchen space' a bit of a lift. Had a larger round kitchen table with a formica top and timber legs...so gave the table-top the same teale treatment as the bench and it now lives on the veranda that came a few years later. Yes! Teale of any shade always looks good with timber. The only pity was that the kitchen walls and ceiling here were terribly smoke stained and had been painted a really horrible pre WWII green. Begrudgingly, I repainted the walls but used a bright orange/yellow to complement the dark teale colour ( this particular yellow is a good colour to keep the flies out) and, in keeping with the era of the house, I installed a built in dark timber kitchen hutch found at the dump shop. The kitchen is the only room to have been painted and repainted....but still have the dark timber parquetry floors. If you get tired of all timber a few splashes of bright colour in well-thought-out places do not go astray. If you have vertical timber panelled walls and you are feeling hemmed in... a good trick is to stain a small section of panels a darker wood colour or with a coloured stain to shift the focus from all the timber. or you can bleach the timber panels lighter. This idea can create interest extending ceilngward from behind a furniture piece...say low display cabinet...or just in a section of wall. You enhance the all timber 'look' with an eye -catching timber panel of another timber hue...like having a mahogany panel set in a light timber wall... Just a few ideas for those feeling a bit claustrphobic in an all timber house....understandable, not all of us aspire to live in a log cabin...but if carefully accented, an all timber interior can be extremely impressive and will not date. This is a pre-digital shot of the glass panels I had installed in the wall around my bed head...its really faded PIC but you can get the idea. Looks better today since the glass has been decoratively frosted with patterns. The sunroom behind the bedroomThis is also a pre-digital PIC showing the little timber kitchen bench with the teale table top. The end and other side of the bench is stained timber. This little table seats 3 or 4. Pity you can't see the old parquetry floor here. Old formica table given a lift with a Teale coloured painted top...there's no room for it in the ' kitchen space'. Amazing what a little lick of the right colour can do in an all timber house.

Cloudyhaze....I think all of the options look good, but it just depends on the look you personally wish to have for your house, because painting the ceiling white will COMPLETELY change the look. My sister has just bought a place that had brick walls and exposed ceilings that had the beams painted mission brown and the ceiling was in some form of raw chipboard type material. She wanted to brighten the place up before she moved in and got it all painted white. It looks beautiful, but I personally would have thought of other options before painting the brick etc. She got a quote for plastering (sheeting) the sections in between the exposed ceiling beams and it was a lot more expensive than painting. If you are keen to paint just the panelling in the ceiling, then I would get additional quotes. I am no painter but I would suspect if it has shellac on it, it will just need an initial sealer on it, before putting on the 2 coats of flat ceiling paint. I think all of the options will look beautiful, because the high ceilings are the feature.........it just depends on whether you are going for a more rustic look, mid-century look , more modern look...I am not sure of what all the designs are called. Good Luck. Your house is gorgeous. My sister lives on Gold Coast BTW.

We had a professional sand and finish our cypress floor with an oil and it looks great. 5 years old now. We've only sealed it once with 'Gemini' floor sealer but it should be done once or twice a year...... The oil is a European brand and quite expensive. The floor guy's use the same product on all their floors be it hardwoods or cypress (cypress is a 'hard' softwood). They do quality work only, throughout Sydney. Many use polyurethanes but these seal the moisture in, don't let the timber breath and shrink, etc. as the poly is like a glue......

A photo would help. Usually I-beams are steel, but I havn't seen them paired with straw ceiling panels before. If discolouration is coming through the paint I would research that you are using the right sort of paint. If they were previously painted then they are probably an oil based enamel paint which can have problems if the new paint is acrylic. Getting the paint problem properly resolved will be cheaper than boxing in the beams with a new material. Best of luck, Dr Retro Dr Retro House Calls