It depends on many things, but also are within these guidelines. A splash back provides a surface which is to be impervious to water, therefore not allow water to absorb, and depending on your state, the regulations directly behind a water point including a tap or outlet is to be minimum 200mm high, and for heat and fire ratings, the area behind a cooktop needs to be 600mm minimum from your bench top is you have an electric cooktop, and 650mm for gas, with the splash back to extend 200mm either side of the heat source either side. So even if you want to only do this, there will need to be quite a bit of splash back, and often people use things like the bench top, window position and overhead cupboards to contain the splash back, providing you a rough idea of where to start and end one. Although not technically required, even in areas without services, a splash back that changes height and doesn't continue around walls to neatly finish off the surface will look out of place, so for consistency, the splash back is best used to effect, and provides an opportunity to incorporate a colour or interesting surface to the kitchen. By no means should a splash back be an after thought or put in simply in response to the minimum regulations. If you have a layout of your kitchen, start where your overhead cupboards are and draw a line around the entire room (even through windows and openings) to see it complete each wall that is part of the kitchen. Meaning any wall that has a bench top attached. Tis is a good place to start. Hope this helps.

Hi Bronwen. I'm sorry to hear your sad news. Here is a link to the colour choices on the Laminex site: http://www.laminex.com.au/products.php#!/splashbacks/metaline-splashbacks-and-panels/ . There are 23 colours in total. I'm pretty sure we chose the Palladium Perle (see 2nd set/page). We obtained samples from the Laminex showroom in our nearby country town (see Locator on website) and ordered it through our kitchen installer. If you don't have a Laminex showroom near you, you can order brochures and samples on 1800 002 204 in Australia (per their website). If you are installing it yourselves, you would have to ask them how to obtain it but you do need to add extra insulation on the panel behind the stovetop.

Hi Sue, I think it would look amazing if you used some tiles with a bit of texture. The wood look tiles that are popular at the moment would be an example. If you chose a colour that toned in with your floor you would get a really nice cohesive look but with a bit of interest. I've attached a photo of a recent design of mine as an example. Just a suggestion!

I'm going to suggest these grey Montage tiles. I think the Como tiles are nice too. Dark grey will add drama and balance out the dark sink. The mixed tones will tie in the variations of grey and silver in the bench tops, appliances and glass door frames. The stone/slate look will add a natural element to complement the wooden floor and balance out the laminate. If you do go for colour, I like Bernadette's suggestion of complementing the glass colour. A tile that looks like pale jade might be nice.