Here's a video of an area of water damaged bamboo being removed and replaced Joyzzz. Maybe you'll consider replacing the area in front of your fridge. Like you I also have bamboo in the kitchen (and pot plants throughout the house), but haven't had any issues with spills marking the floor. It's a shame there's so much variation in the manufacturing process resulting in some floors tolerating spills and others not at all. I do have a damaged board though thanks to a guest leaving a tap running causing an overflow...that I wasn't told about until days later, grrr. Fortunately the damage is in a shadowed corner and the sealer is still intact, so it isn't noticeable, just a wrinkled surface to the touch. Which is lucky, because our home is earth-covered and there is nowhere for water to drain out of the sub-floor as we "tanked" it with a sealer to ensure no moisture can make its way in. That board sat there in a puddle for days! I still wonder why only one board suffered damage, very strange...

I'm always surprised whenever I read discussion threads on the pros/cons of timber vs engineered or timber-look products is that I seem to be the only one who cares about the sound, not just the aesthetics. I grew up in very old houses and for me, that sound as you walk along a real timber floor is majestic and cannot be replicated by other products that to, seem to all sound like fingernails on a black board in comparison (okay not really, but it evokes the same reaction in me as does walking on lino). So, for that awesome sound of "real" timber and for longevity's sake, authenticity's sake, and all the reasons above I say option 2. Of course, budget is also important and I totally understand the width argument too.

My $0.02 - in NSW designers are NOT registered or accredited, beware. All architects are nationally accredited. I suggest that there are a lot of things you can do yourself before you start - get a proper survey of your block, ensure that you get them to provide angles for anything that isn't square....understand if there are utilities like sewer pipes which will affect your setbacks or useable space...... Go online and workout the sun angles for your longitude and latitude helpful for solar and overall layouts. West facing picture windows are not the best. Some of the solar firms have online calculators which help to do this. Read the local council rules and understand them, apply them to your survey and your design ideas....including if you are a corner block and if you want to go two storey...... If it is still a 'go' Get all of the heritage, flood, fire etc checks done by council - around $150 depending on council........ Eliminate or at least understand all the big constraints before you go any further........ Look again at the survey- any contour lines may cost you money, assume a cost of at least $2000 per sqm to start and do some layouts of your ideas on paper, add up all of the spaces, can you actually put them on your block? How much is the total?.......yes garages are slightly cheaper to build but still take up precious footprint space.... Is access likely to cause issues for trades, equipment and deliveries?......... Keep refining and updating the ideas and plans thinking about how you want to use the spaces and move around inside and out.....where are you putting the wheelie bins, clothes dryer etc..... Try the free to use BASIX site forms if you are in NSW, understand how the size, shading and orientation of windows affects your sustainability and adjust, this will also apply many of the local council rules as well..... Do you want a brick house, with render? A pole home, a kit build? A fast build insulated panel build? What type of roof?...... The more you have worked out for yourself the better, look at the kit home options, there are lots and some are very good... Everything is delivered and you just construct with the trades and some may have builders in your area.....The new InsulLiving Code Mark BCA approved options are also worth a look..... Anyway do all of that before you line up for the fleecing floor lol

I'm after a kind of warm and clean skandinavian look I guess. I was thinking of incorporating a couple of timber look open shelves in between the white cupboards on the wall to break up the white a bit. But if I introduce another white won't there be too many different white tones?