How funny. I just renovated (on a budget) my small kitchen and added exactly the slate look in tiles you have, though they are in fact porcelain. And I placed them throughout the house for continuity. The tiler asked if I was after a retro hippy look but it doesn't look like that at all. My cupboards were the same colour as yours and I utilised the bones of the kitchen and had the doors and Benchtops changed only. I also have plenty of light in the kitchen but chose white doors and as I was on a budget I chose granite look Benchtops, they are very serviceable and it looks great. The blue backsplash was the colour lift and here you could choose any colour to your liking. Basically the kitchen ended up with white cupboards and appliances other than cooktop, with the stainless cooktop and coloured splash back being the focal point. The paint colour are: whisper white walls, integra splashback, white ceiling and for increased contrast I used the same white above the splashback on the rear wall. I would consider painting out the brick but leaving the texture.

Hi Rach163 So the splashback is along the wall behind the stove? And is full height to the ceiling? No overhead cabinets there? Certainly for an all-white kitchen, and a very small wood-element on the table, I'd suggest a feature colour splashback. There's a few ways you could make it pop - a colour such as a rich red, or a striking (but not bright) green, or even a blue would work well. We used colour-backed glass for our splashback in our all-white (but dark benchtop) kitchen, which is low maintenance and looks very "rich". It's a red (burgundy?) feature "wall" below overhead cabinets on two sides of our mostly L-shaped kitchen, and we also put it under the island bench/table, to tie the two together. The other idea that struck me is that you have a view to the outside (albeit a covered courtyard dining area now?). That made me think of a mirror to reflect the view, or at least the light - so something like a polished stainless steel. Perhaps in sections or strips with brushed steel, to reduce maintenance :-) For the lighting, we used an led strip under our overhead cabinets, either side of the range-hood, and around the corner to where our sink is. You could do something similar with a narrow aluminium channel either at the ceiling (probably too high) or at range-hood level with an led strip (a waterproof one!) inside it. It's nearly invisible when not on, just a crisp brushed/polished metal line, but gives a really bright uniform light across the whole bench area, and no shading issues with the main room lights behind you. If you wanted real wow, get a multi-colour led strip that can be colour changed (and be dimmed) to suit your needs and moods. And if you wanted to freak people out, you can get a multi-colour programmable led strip that can also do things like active lightwaves, pulsing and respond to music and a bunch of other things :-) All of the strips are dirt cheap, unless you buy them through most Australian lighting stores :-/ We also put a dimmer led strip underneath our island benchtop, to pick up the splashback/underbench colour, and as a nice 'night-light' of an evening. Works really nicely. I've seen some people do it at the kickboard level (i.e. 140mm above the floor), to make it look like everything is floating, but I've found that only works for some kitchens. One of the benefits of controllable coloured led lighting can be that the splashback can also be white or silver, and it's the lighting that determines the perceived colour. Leds are quite directional though, great for benches but less for wider room lighting, unless you have them in a diffuser. We use led lightbulbs in four high ceiling fixtures, and one long-drop over-dining-bench light, since they are lovely and bright and warm (if chosen that way), and as the ambient light source. You can also get colour/controllable led lightbulbs but $$$. You want to think about where you want feature lighting (up or down), work lighting and ambient lighting. Think about where you will stand to work, and which lights you will be shading, which will be shining in your face, and which will actually help. We pushed around our lighting points on the design, and even over-catered on the number of fixtures, just in case we missed something. You can always disconnect a light and cover it trivially, but putting one in later or shifting one is a bit messy. Anyway, my two bits. :-) Cheers, Markus

Besides the fact that it isn't my style (and thus I agree with oklouise to sell on ebay...), the first thing which strikes me, is the crammed working area: stove/ sink/ prep. How can you operate in that space? Other side appears to be too far away to be practical? Then the fridge! If you have an expensive and very ornate kitchen, you can't have a free standing fridge! One way or another your fridge has to be integrated, which brings you back to the style question. Either you like the style and just want to i.e.white wash it (liked that option, if you are into beachy, country), then you need a matching door made up (I'd calculate 2K) and buy an integrated fridge (A$ 2-4K) or you don't like the deco, lay-out, impractical space and want to replace it all, then you can possibly get away with a free-standing fridge in a much less ornate kitchen. If you basically don't mind the kitchen and can work well in the crammed working area, or your budget doesn't stretch to a new one (think about $ 25k+), I agree with the white wash solution and taking off all the excessive ornaments and trims, putting in a flat SS or glass range hood. Also install rails with hooks next to cook top and hang your utensils, you need every square inch on the counter! Microwave to be incorporated perhaps under oven and off benchtop. Maybe spend the money and buy a matching Miele microwave, will look nice with the oven. Look into brightening the gloomy kitchen (on top of white wash) by changing the black bench top and splash backs with light ones. It might save $$ if you just get the ex one covered ( I guess about A$ 6-7k). If it was my kitchen I would definitely sell it, before spending all that money on bench tops, fridge door, integrated fridge, m/w integration, removal of trims, painting, splash back etc. and still end up with a mediocre and impractical kitchen. Would be very interested to see more of your actual style. Can only make out an Ikea shelving unit on one photo... Your decision has a lot to do with the longevity (and cost) of a kitchen, your actual style and the practicability of the ex kitchen! If you can afford it, think long term and maybe save up for THE kitchen you want. If you want some tips on how to keep costs in check and still get a great result for a new kitchen, just contact me. Good luck.

As everyone has said it looks good but sometimes you just need to update and change. There is products available, Kerlite porcelain cladding for one. Kerlite is a thin porcelain cladding that comes in many colours and textures. Can be used on walls floors bathrooms, outside etc. I had a small court yard with a door leading to the garage. I covered the door and the rendered wall to make it all flush and create a feature wall. Basically there is nothing you can’t cover and the colour and texture range now is unbelievable. Kerlite is definitely not a diy job, you need the experienced tiler. Also it’s been out for a while now and I’m pretty sure there is tile cladding etc etc. maybe google porcelain cladding, there will be similar products. Check it out I highly recommend it.