Spotted Gum is a great hard wearing timber with a Janka rating of 11. This means it is high density timber and won't dent as easily as softer timbers like American Oak. A polyurethane finish is the hardest and most durable timber floor coating and it comes in gloss satin and mat. The lower sheen's are more forgiving if you you have pets and young children. Bamboo is another hard product but only comes in short lengths so you would need to take that look into consideration when selecting. Some clients don't like the look of the short boards and consider it a cheap look. Others prefer the longer floor boards of timber. If you do choose bamboo make sure that you find out the coating used and whether it can be sanded and re coated down the track, as all timber and bamboo floors will need a touch up especially if you have pets. Some bamboo floors can not be sanded due the coating used. Hope this helps. Our website may offer some inspiration. Good Luck http://budgetfloorsanding.com.au/

I think that would look great with floorboards in a classic walnut colour, that would definitely look great with the light cabinets. If you want an idea of how it might look with the end finishes, you can type this into google and they should be able to show you a few.

Gorgeous brick pavers, I love that look for the floor! It has a rustic appearance yet you're right- sophisticated, even an elegance. I think this would suit the feeling I'm wanting for the room, the pine boards have a rustic appearance, this would go well with them. We have a 1m square oak table with cross back chairs for the dining section and a La Spezia 3 light pendant (Beacon), farmhouse sink, timber hood cover to give you an idea of the look we're going for. Thanks very much for your thoughts on this. I like the idea you're going with, but yes, we have the window and door in already. Door could be trimmed if necessary. It wasn't until the window was already made and the wall sheets and cladding was removed that we realised the original kitchen layout had the back door next to the window, and the door into the laundry section was a modification. I most likely would have put it back where it was originally or had double doors. It made no logical sense for the back door to be a thoroughfare through the laundry, eliminating valuable storage space. I may have just left the kitchen in the original layout and made an entry into the laundry from the kitchen side for a laundry/butler's pantry with fridge in there. Removed the side window for more wall space for storage and changed the existing door to a window. But it's too late now, the outside of the house has all been newly clad so doors and windows are as is. There's no other possible place in the house for a laundry. It is a very tight space. Plan to build an external laundry studio in the future. The one in the house would be temporary, yet need it to accommodate a washer dryer combo for now, and be suitable for prospective buyers/renters in future if the external laundry doesn't eventuate. This is the original 1960's floor plan. A previous owner made internal access into the laundry and made bench space where the original back door was, the next owners opened up the living to dining room and blocked up the hallway doorway which became the fridge space. The cornice didn't match up in the hallway though where the old doorway was. They had made a shelf from the cut out on the hallway side, and the protruding section in the kitchen side became a kind of bulkhead for the fridge. Old hallway We've rebuilt this so that it could have an upper cabinet on the kitchen side/ hallway later if needed. But the lack of space in the hallway didn't allow us to build a linen cupboard, so that will also be needed to be included somewhere in the house. At this stage, thinking we will have to configure the laundry space to have a linen cupboard/ broom cupboard between the dining room and laundry section. Open to ideas too for storage in that limited laundry area space. I'll add more measurements to the floor plan for reference.

We did think of pulling up some tiles from elsewhere, but they are stuck way too well and would certainly break. Everything in this place is built to withstand a massive tornado, or maybe a bomb blast! We think the builder had shares in the company that made Sikaflex! And no, just using contrast on the threshold won't do it, sadly. I do think we'll have to cut out some good tiles to extend the feature somehow so it doesn't look odd.