Hi Barry, I personally don't think the large blank space lends itself to a piece of art. It's up too high and contrary to your thoughts, it wouldn't be the feature you'd hope for it to be. Besides, the money you spend on a piece large enough, would be better spent on a smaller, higher quality piece mounted at the correct height (eye-level) that would compliment another part of your home. Getting back to the blank space, have you considered using a timber veneer for the wall cabinets? Something that would work with your bench, and then you could use the same veneer as wall panels to continue above the blank space over the cupboards. Perhaps you could even incorporate led strip lighting to give it a little more wow factor. Timber is great because it adds a layer of warmth to the polished concrete and dark cabinets. Good luck, and keep us posted! Would love to see which way you go. Cheers, and have a great weekend. Steve

I will start with an admission - I have read nothing of the comments. However I have helped a friend design a compact laundry. Here was how we did it. 1. Start with a list of everything - and I mean everything, include pegs, those little lint ball things for the washing machine, buckets, mops, vacuum, airers etc - that you want to store in the space. 2. Break that list into where you want to store it - drawers, wall, or cupboard - and then rewrite the list as cupboard, drawers, wall etc.As you are doing this, see if you can store those items elsewhere - we added a ceiling airer in the bathroom using pulleys. Also mark any item that a special storage gadget might help. We added to the back of one door (I think they were custom made 925mm and 2300mm high) a hanger for the vacuum hose, and in the cupboard a hanger that slides out for the brooms and mop. 3. Go measure the space you have, and be exact - if the measurement is 1457mm it is 1457mm. Also, see where you might "borrow" space from. We managed to add another 650mm deep, 750mm wide cupboard by swapping the two bedrooms around, and using space in the guest bedroom wardrobe. 4. Draw up a plan, and be really specific. If you think you need four drawers and a top mounted sink then plan that way. Whilst you are planning think over whether you want top spec and not hide it, or to hide it behind really nice doors. We used reasonable quality from Bunnings and modified because it was behind doors. Also, don't be afraid to "borrow" something from a different zone. In my laundry I used a round kitchen sink, because I didn't want a really deep laundry tub so I could use the room underneath. 5. Go and find a really good quality cupboard manufacturer or builder and ask them to look over your plan and ideas. They may tweak to assist, but remember you know your space and what you will be using it for better than anyone. In my friends case, she had a brother who assisted and made a super looking set of doors. As to resale value, that depends on who you want to buy it, but I have one piece of advice - don't go for the resale value, do it because that is what you want. In my friends case she turned her laundry into the bathroom, and then turned the oversized bathroom into a very natty study. Good Luck.

We too live in a cold winter climate with our bathrooms all on the southern side and faced similar issues as you do. One smaller bathroom does not have a window so we put in a Velux skylight which provides amazing natural light through the day. This may not be to your liking, especially if you have a period home. We also use heated towel rails and under tile heating (just enough to take the chill off and stop mould) in winter. Although we have a light in the shower recess, a bonus is the large fixed shower head with inbuilt LED, which at night gives the feeling of showering under moonlight. We chose light colours and mirrored recessed cabinets to reflect as much natural light as possible.

Hi oklouise The sad part is the existing bathroom is beautifully finished! This whole house was well finished and really well built. It was sad to have to demolish things that were so well done, but the design problems made changes necessary. The bathroom has porcelain wall tiles floor to ceiling on all walls and a white polished porcelain floor (slippery as all hell, and a mongrel to keep the grout lines clean!) is laid over a full 300mm+ of solid concrete, under which are all the drains. Outer walls are 200mm of reinforced solid concrete. Tiles on internal walls are over cypress timber frame with generally two layers of lining glued, screwed and nailed on - and there is way more timber in the frame than necessary. I think the builder (who built it for himself) thought the house would last forever and would never need to be changed in any way. Exact distance from external door to wall is 1.1m on both vanity and shower side. The door combination is 1200 wide and placed dead center. It's worth noting that 300m on the vanity side of the door is full-length frosted glass panel and it's possible to infringe a bit on that area if absolutely necessary, provided there's enough room for the door to swing safely (as it swings toward the vanity. I will take some photos now and share.