As much as I love sisal for the natural fibres and hardiness, I found they stained really easily. Even with water. So I've gone with jute for the look, softer feel underfoot, texture and stain hiding abilities.

Your tile will co-ordinate beautifully with the timber if you can pick one of the darker colours out of the timber and select a tile in this family of colour. The trick to making a colour concept work is to either co-ordinate or contrast. If your timber is as busy with grain and colour as the image you've shown, then maybe co-coordinating is the best way to go. Never chose materials independently of each other - always take a tile sample home to see in the natural light, next to the timber. I hope it all works out the way you envisage it. Cheers, Michelle

A lot of tradespeople like welders, cabinetmakers, etc. are on their feet all day on concrete so I don't think thats the real issue. It isn't the prettiest space at the moment thats for sure. I'd polish the concrete. This will really make a great spot as paint may just wipe straight up if some gets spilt. If the polishing is too expensive a pressure clean and then a satin clear seller will look great. An alternative would be a marmoleum type of floor covering if you really hate the concrete. Look at 'Forbo'. Sixties beach shack..... I'm jealous by just hearing those words......

Gorgeous brick pavers, I love that look for the floor! It has a rustic appearance yet you're right- sophisticated, even an elegance. I think this would suit the feeling I'm wanting for the room, the pine boards have a rustic appearance, this would go well with them. We have a 1m square oak table with cross back chairs for the dining section and a La Spezia 3 light pendant (Beacon), farmhouse sink, timber hood cover to give you an idea of the look we're going for. Thanks very much for your thoughts on this. I like the idea you're going with, but yes, we have the window and door in already. Door could be trimmed if necessary. It wasn't until the window was already made and the wall sheets and cladding was removed that we realised the original kitchen layout had the back door next to the window, and the door into the laundry section was a modification. I most likely would have put it back where it was originally or had double doors. It made no logical sense for the back door to be a thoroughfare through the laundry, eliminating valuable storage space. I may have just left the kitchen in the original layout and made an entry into the laundry from the kitchen side for a laundry/butler's pantry with fridge in there. Removed the side window for more wall space for storage and changed the existing door to a window. But it's too late now, the outside of the house has all been newly clad so doors and windows are as is. There's no other possible place in the house for a laundry. It is a very tight space. Plan to build an external laundry studio in the future. The one in the house would be temporary, yet need it to accommodate a washer dryer combo for now, and be suitable for prospective buyers/renters in future if the external laundry doesn't eventuate. This is the original 1960's floor plan. A previous owner made internal access into the laundry and made bench space where the original back door was, the next owners opened up the living to dining room and blocked up the hallway doorway which became the fridge space. The cornice didn't match up in the hallway though where the old doorway was. They had made a shelf from the cut out on the hallway side, and the protruding section in the kitchen side became a kind of bulkhead for the fridge. Old hallway We've rebuilt this so that it could have an upper cabinet on the kitchen side/ hallway later if needed. But the lack of space in the hallway didn't allow us to build a linen cupboard, so that will also be needed to be included somewhere in the house. At this stage, thinking we will have to configure the laundry space to have a linen cupboard/ broom cupboard between the dining room and laundry section. Open to ideas too for storage in that limited laundry area space. I'll add more measurements to the floor plan for reference.