There is a product called Nanokote that you apply to the shower screen so the water just beads off when wet. Now I did try this product years ago and didn't find it that great but it could of improved by now. But my husband uses car wax on the windscreen of my car and polishes it off so water just slides of it when it rains so I am thinking of him doing this when we move into our new home shortly and see how that goes. As for tiles everyone raves about those steam machines but in the product reviews I haven't found a model that hasn't broke down after a short use.

From what you're describing, I wouldn't say you're "very particular." No amount of Chux is going to deal with glue on carpets. That needs to be sorted. And why is there paint on the timber floors? In my experience, either the floorboards (genuine hardwood) are sanded and finished after the painting is done, or the floorboards (engineered timber) are installed after the painting is done. I watched the painter work around windows in our house (also a new build) and he was cleaning off the aluminum frames as he went. Why didn't your builder's painter do the same? It's not rocket science to figure out it's easier to clean paint off when it's wet. I really hate it when buyers get stuck with doing penny ante stuff because the tradesmen are sloppy.

I have a house that is tiled in a multicolour slate tile all through the living areas. The house was built in the 90's and was only 4 years old when I bought it in 1996. I am assuming your tile is also a natural stone?? if so it will need sealing as they are porous and may need resealing down the track, we have only resealed our floor once. Make sure you keep a note of the brand and type of the sealer for future reference.I would not take it through to the bedrooms - too much. The floor is very forgiving of dirt, dust, food splashes etc, if you have a busy week and don't get round to washing or vacuuming the floor no one will notice. The multicolour will work with your hamptons inspiration, careful choice of wall colour is needed, you may need to have the floor laid before you make a final choice to see what the colour it throws. A wall colour with a slight hint of colour works better with the multicolour than the bright whites or yellow whites. Hope this helps.

Things are ticking along . We have a whole lot of long skinny flush-mounted LED taillights -- they won't be fitted until we take Frankie off the road to re-paint , as the existing lights come off , and these ones will need holes cut , the exterior repainted , then these lights bonded ( glued ) in . The Mercedes seats have had new certified mounts made ( being a safety item , we spent about $150 getting them certified -- keeps it legal , although there are literally thousands of vehicles out there that have had seats changed , and no certs ) and we made little 'boxes' that have walnut tops , and all the controls for the electric seats are in these ( on Merc cars , they are on the doors , but our auto sparky has made new mini wiring looms ) . We dropped the seats to the upholsterer last week , so in the next month or so they will be recovered -- a sort of bone/cream leather for the surrounds , and red leather with diamond stitching up the middles . This is almost what my cab looks like , mine has 1980's Falcon or similar bucket seats in a grey vinyl . I assume that was done so that there is only the 2 seats , and you can get through to the back , whereas in the pic with 3 seats , you can't . My interior is the same colours -- 3 different charcoal/grey tones on the dash , then a black on the doors ( why , I have no idea -- I would have thought charcoal would have been better ? ) . Once the seats are back and fitted , I am tempted to get the door cards redone -- do a padded charcoal vinyl that matches one of the dash colours , but do a 'scallop' from the rear of each door in the lighter leather , then a red maybe 150mm wide scallop in the middle . I feel that will tie in the doors , the dash and the seats better . The booth seating ( table and chairs basically ) in the rear will get done the same cream/bone and red leather , to tie it in a bit more . Which then brings up 1 problem . You may have noticed I have used a downloaded pic , and I was going to post a few 'before' pics of the cab and the rear , so you can see it in its 90's wooden and tacky lino glory , but that turns out to be a problem . All the 'before' pics I have are ones that the last owner e-mailed to me . I downloaded them all , they are still on my computer , I can look at them no problem . BUT for some reason , they aren't JPG's -- they show as 'Google Chrome Files' , and I can't work out if I can post them here -- I've tried but nothing happens . Are there any experts that know how to post these 'files' ( pictures ) ?