Hey thanks Carole, I just found that in a colour chart and it looks really hopeful to me... I think you're onto something! It just might be the one... Thanks so much for the tip, I'm off to get a sample pot!

If you seek a modern look for your house, then I can recommend our Ebony range. These bricks are very smooth and have unique dimensions. Alternatively, if you want to mix things up and put some really stone like looking bricks in as features, then our Tierra range will work for you - thinking the Toledo or the Bilbao. They will be the colours that suit. These bricks are really unique. Handmade, incredibly textured and varied. Have a look at these options and see if it helps.

Great advice above from MB. Vivid white is extremely bright outside, I can't suggest enough to use a tinted white. You will need sunglasses otherwise! Surfmist works pretty well with most colours but can throw a slight green. Dulux Natural White will be good, but very bright. If you can choose something other than Colorbond colours here's a few. Just make sure the paint dept confirms the tint is for exterior use (can be a problem for exterior paint tint, even if it's an exterior paint). Dulux colours: Todd River - newer one, I haven't seen it large scale. Doesn't throw green. Simone Weil - throws a slight blue, but quite a neutral grey. Tristan - brown based grey It would look amazing if you could clad the LHS grey section (with the two windows in it) in a horizontal timber cladding to match your door. Probably not an option though!

We're renovating a beautiful old homestead on our farm and I need some exterior colour advice! We've built a new section on and have reroofed the entire house. It was impossible to match the lovely red/brown bricks used on the original part of the house so we have decided to render the new section (as well as another part of the house that was added on some years ago). Roof, bullnose verandah and gutters are Zincalume. Fascia / windows / french doors are all Colorbond Surfmist. We're replacing all of the verandah posts with new timber posts, and the front and back entrance doors will be a matching timber. Now I need help choosing a render colour!! We'll be building a garage near the house and thought we'd try to pick a Colorbond render colour so that we can tie the garage in with the house - perhaps Wallaby or Jasper?? I'm concern they'll be too dark though. Someone suggested that we do a half tint for the render and then the full tint for the garage... thoughts anyone?? All suggestions or advice most welcome!! Thanks