Filling gaps between timber floor boards can lead to disaster and is best avoided. Sanded and polished timber floors tend to swell slightly during the humid months of the year and shrink again in the drier months. This creates movement in the timber floor. If you fill the floor when the gaps are at their widest and then encounter some humid weather, the floors will swell, closing the gap and forcing the filling out of the grooves and cracking the timber floor finish. This looks far worse than gaps in the polished timber floors. If you can't live with the gaps, laying a engineered timber floor over the top may be your best choice. Painting your floors white is also best to avoid as this only accentuates the size of the gaps. Good luck with your decision. Engineered timber floors

i added a dining room extension 2 years ago and chose cyprus pine flooring to match the existing timber floor of my old cottage. Im near beaches so decided to lime wash the floor. 2 years down the track whilst i really love the look i can tell you the finish does not last. It is not even a high traffic area and you have to keep an eye on it to keep it clean of any little marks so they dont damage the surface of the wash. So my advice would be whilst a really beautiful look avoid because it does not go the distance.

Hi Sofia I definitely think brick lay would work better on the walls in the bathroom purely because you have a 30x30 on the floor and a 30x60 on the wall. You will find the tiles could look out of place trying to stack them. It would be a different matter if they did not share 1 or more dimension. Perhaps in the ensuite, consider doing something like this: [https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278[(https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278) Tile the floor and half way up the back wall with the "floor tiles", perhaps a tile or 2 above the vanity unit and then continue with the white tiles to the ceiling. You could hang your mirror so it covered about 1/4 of the "floor tile" and 3/4 of the white above the centre of the sink. In the main bathroom consider something like this: [https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647[(https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647) Tiling the back wall to the shower in the "floor tile" to the ceiling with the white tiles behind the loo to the ceiling. Alternatively, tiling the entire back wall with the "floor tiles". The first option may make the bathroom feel smaller if the shower takes up more than 1/3 of the back wall. Doing the two different options would give the bathrooms continuity, but also some individuality. I hope this helps. Look forward to perhaps seeing the outcome. James

They look suspiciously too good to be originals. If you feel they aren't I'd paint the whole lot with paving paint.