Thank you @Creative Style Interior Design and @bigreader @Creativelychallenged - Thank you for your nice words. We are indeed very happy with the result. We also went through all these stages you describe, so don't feel depressed... there might be light at the end of the tunnel. Our research stage was so long and quite discouraging at times. We've always wanted to live in a queenslander, but our house is not one. This didn't stop us on going ahead adding some character to our bathrooms design (and kitchen). We started with the idea of making these bathrooms with a colonial touch but we found that it was not easy to find the elements we wanted (tiles, furniture, tapware) at a cost that would fit our budget. We learned that the type of tiles we liked (encaustic) were VERY expensive ($200+), traditional looking furniture was also very expensive... So we shifted to a more modern design...(not very happily though), and after a while of collecting ideas for modern tiles, furniture etc.. we felt quite depressed because we were compromising... updating our bathrooms with something fresher, but far, far away from what we really liked. In our view modern furniture looked very plain, streamlined and... boring, but we were doing 2 bathrooms (on a budget) so we were not prepared to spend a fortune, and we settled with modern. We ordered marble type tiles for the floor 900x600, and wood like tiles for the walls, and booked the builder to start demolition. Luckily for us National tiles called us saying that there was an error and the tiles they promised were not going to be available for 3 more months!!! Depressed again.... It took us so long to find something we liked (kinda) and now we were back to square one. Then my lovely wife said... Why don't we give it another go and try to make a more traditional design as we originally wanted.... So to make it short... we went back online with 'refreshed' energy and pressure (demolition already started) and found many things I coudn't find before: Floor tiles @ $25/m2 Subway tiles for walls @$16 the box on sale... Ensuite furniture and basin from Ikea Main bathroom furniture was an antique dresser we found in an op shop for $150 repainted and repurposed.... etc... In the end we spent approx $12,5K for both bathrooms in total :-) So, to summarise... don't dispair... just look in this website, on pinterest, magazines, google, etc... Play around with ideas and copy!... (you'll see that our ensuite is quite similar to the first photo in this discussion)... Good luck! :-)

Hi Michelle. The fixed mirror was in line with the doors of the cabinets so that it looked like one large mirror with 2 joins. Our vanity was sort of in an alcove so the vanity and mirror went the full width of the alcove, about 1500mm. The alcove was because one corner of the bathroom was cut out to make a cupboard in the adjoining room, and the other side of the alcove was a matching wall which hid most of the toilet. That's why it worked to have a bulkhead in the alcove. I'd sent a photo but we've moved to an already built house. I miss those cabinets. We had wanted the cabinets to be inset in the wall but that didn't get communicated clearly enough in the plans. We (actually the builder) partly packed out the splashback area above the basin so that the cabinets did look partly recessed. Whether that's an option would depend on how much width you have to play with. Our ensuite was not small. I might also add that we decided to only put in 1 basin because the idea of needing 2 seemed so wasteful. We never regretted it. We easily worked out our morning schedules to not need the basin at the same time.

Thanks everyone for your comments so far. Some great points have been made and I'm going to take each one of the away to have a think about. In the meantime, I've asked my draftsman to provide me all the measurements to existing and proposed so I can share it here as soon as I get them. Some more info: We're located in the northern suburbs of Melbourne. Our budget is approximately around the $200k...this is so we don't over capitalise on the property. We thought about building to one boundary because we are of the thinking that we need more width to achieve the space we want. As a guesstimate, I believe the block is 12m or so wide. Each lane way is approximately 1.5m (3m combined) which only leaves us with an internal width of 9m (minus walls). We chose to explore building to the eastern boundary because existing utilities such as hot water system, ducted heating are already setup there. Moving it to the western boundary would cost $$. The eastern laneway has nice new concrete paving and allows us to more easily access it from our carport.The other reason for potentially building to the east is because we're the 2nd last house on the street (near a corner). We get a bit of traffic on our street but more so on the street parallel the western wall. I thought it would be more peaceful moving the house away from the traffic and noise rather than towards it. Also, the addition of the dining area (connected to kitchen and alfresco) will give us a bit more privacy from the street (parallel to western wall) when we're out on the alfresco/deck. Just my thinking but happy to get some further feedback. We're happy to consider keeping the current building boundary if we can achieve the design we want etc. I've attached a few pictures of the existing low ceilings towards the back of the house. The pics show the ceiling from kitchen and towards the back door (curtains are closed). The ceiling is about 2.4m and you can see the exposed beams which makes the ceiling feel even lower. I'm only 1.6m and I can touch them with my finger tips if I try... Whether it's a full knock down or increasing the height of the roof, I think it's the one thing we're about improving/removing. Hope that's some more info for everyone to go off... Thanks again for everyone who has already replied and made some great points. Cheers

We too live in a cold winter climate with our bathrooms all on the southern side and faced similar issues as you do. One smaller bathroom does not have a window so we put in a Velux skylight which provides amazing natural light through the day. This may not be to your liking, especially if you have a period home. We also use heated towel rails and under tile heating (just enough to take the chill off and stop mould) in winter. Although we have a light in the shower recess, a bonus is the large fixed shower head with inbuilt LED, which at night gives the feeling of showering under moonlight. We chose light colours and mirrored recessed cabinets to reflect as much natural light as possible.