We have four farmhouse style sinks in two different houses, and all present the same problem. It doesn't have anything to do with the material as two sinks are concrete, one stainless steel, and one composite stone. With the two kitchen sinks it's very frustrating spraying out the food particles from corner to corner. Food particles go from one side to the other, and it's very difficult to corral them to the drain. The two concrete bathroom sinks don't have enough slope, so when shaving and brushing teeth, the water and material flow to the opposite side of the sink. It's annoying to wash a 3' wide sink every time it's used. And gross if the sink isn't cleaned from side to side after every use. As a compromise, we're installing a farmhouse concrete bathroom sink with two drains and more slope. As I evaluate many things in life, a, farmhouse sink is a solutions looking for problem.

Thanks everyone for your further comments. No problem about it being an old post, always nice to communicate with people about design solutions/problems. Jilly, I posted some photos on 1st January 2016, they appear further up in the post. Garden Beet Pty Ltd, and Morel Construction Ltd, both of your solutions look great, but our problem still remains the western Queensland sun which is pretty vicious on anything that will either wilt, fade or break down. It was quite a difficult challenge to come up with something that was affordable, workable and durable. I would love to have had plants because I believe they soften large "hard" exterior areas, but we have decided that we will do that with pots around the pool area. Still have that to do, even after all this time. :) Thanks everyone for re-igniting this chat. Jilly, hope you find something that works for you.

Thanks Fiona. We'd love to landscape the far side but sadly that is our neighbour's property and the river rock lined area right beside the pool fence is an easement that runs like a creek when we get rain so can't plant in there :). I do plan to sneak in a few more of the Golden Cane palms onto the neighbouring paddock as some have self seeded anyway- hopefully create a nice screen. I have my eye on some nice pots and two lovely wooden loungers with cream cushions, all in budget. But I'll only get them once I decide what to do with the paving area to better blend with the pool surround. I've just had the area pressure washed about 2 weeks ago so my thinking is to go with the repaint in the medium grey and hope we get 5 years out of it.

Hi all, Sorry for the slow replies and thanks for the input so far. From what I've read online a re-inforced besser block wall should be about $600 p/sqm including footings in Sydney (Hornsby shire council area). Given the wall is 1m x 10m it should be let's say $7k including design and DA or am I way off? I'd also need to dispose of the current wall + footings but I could probably give the blocks away. The paved area is about 40sqm. Would it be safe to assume $200 p/sqm for concrete base, paver supply (travertine) and install (coping and surrounds)? So the wall and and paving would cost let's say $16k + fencing + cladding. This isn't too bad considering how much better it would look and the value it would add to the house. I like the flexibility the besser would give - render, cladding etc are all options. I'm not sure how bad it is structurally it just has a couple of spots where I can see the blocks have pulled apart over time. Below are some pictures of the bad spots. Also looking at the Amber website it says the maximum courses is maximum non reinforced wall height of 972mm (6 courses). It looks like my wall is actually 7 courses un-reinforced. The wall and pool was built back in 2003. I definitely think planting in front of the wall would help, as would removing the lights but I'm in two minds about whether to bite the bullet and do it properly or just hide it.